Operation Manual

12
Set the required temperature4.
The temperature can be set from +5°C to +30°C in steps of 0.5°C.
Warm water is always available (50°C) when the boiler is on and running on LPG or electricity.
During summer, when only warm water is required, adjust the temperature setting to below the surrounding
temperature so that the central heating pump does not start.
The temperature displayed is 1.
the temperature which is set at
present (in this case 22.0°C).
Raise the temperature by 2.
pressing the + button. Lower
the temperature by pressing
the – button.
The settings are ready and the 3.
central heating pump will work
at the set temperature.
Warm water 5.
If you need more warm water, you can raise the water temperature temporarily from 50°C to 65°C.
After 30 minutes, the boiler reverts to normal operation. When you have selected more warm water the circulation
pump stops.
Increase the quantity of warm 1.
water by pressing the + button.
The settings are ready.2.
Reset the warm water by 1.
pressing the – button.
The settings are ready.2.
If you wish to revert to the basic warm water settings before 30 minutes have expired.
MENU
C22
Off
On
3 kw
MENU
C22
Off
On
3 kw
MENU
C22
Off
On
3 kw