ASSEMBLY INSTRUCTIONS Description : 36X36X48 DINING TOP -1-
BEFORE ASSEMBLY IMPORTANT NOTE: Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched. Remove all wrapping material, including staples & packing straps before you start to assemble. DO NOT tighten all screws and bolts until completely assembled. Keep all hardware parts out of reach of children. WARNING: Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your table.
STEP 1 Unlock the table top on both sides from underneath the top. Pull the 2 parts of the table top apart and remove the leaf as shown below. STEP 2 Attach Top (A) to the Base (B) by using bolts (1), and washers (2) and (3) as shown below. Tighten with Allen key (4).
STEP 3 Unlock the table top from both sides underneath of the top as shown below. Pull the 2 parts of the table top apart. STEP 4 Place the leaf in the center of the open table top. Push the table top closed. Lock the mechanism underneath 2 sides of the table top as shown below.
