Assembly Instructions

- 1 -

ASSEMBLY INSTRUCTIONS

Dimension : Ф42”x29”1/2.H

Cube Size : 44”x26.7”x3.1” NW: 28.6 LBS

(TOP) GW: 31 LBS

Cube Size : 25.5”x9”x6” NW: 12.1 LBS

(PEDESTAL) GW: 14 LBS

ROUND TABLE WITH 2 DROP LEAVES

Description :

ROUND TABLE WITH 2 DROP LEAVES

PAGE 1
ASSEMBLY INSTRUCTIONS Description Dimension Cube Size (TOP) Cube Size (PEDESTAL) : ROUND TABLE WITH 2 DROP LEAVES : Ф42”x29”1/2.H : 44”x26.7”x3.1” NW: GW: : 25.5”x9”x6” NW: GW: ROUND TABLE WITH 2 DROP LEAVES -1- 28.6 LBS 31 LBS 12.
PAGE 2
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
PAGE 3
STEP1 Attach legs (B) to the pedestal (C) with washers (1), (2) and nuts (3). Tighten with wrench (4). B x4 1 2 3 4 C STEP 2 Put the Mounting plate (D) on top of the pedestal, and attach with bolts (7), washers (5), (6). Tighten with Allen key (9).
PAGE 4
EP 3 STEP 3 Attach plastic(11) to the top (A). use the screw driver to tighten the screws (10) as shown below. X4 10 11 A STEP 4 Carefully place the frame (from Step 2) on bottom side of the table top (A), with bolts (7), washers (8), (6). Tighten with Allen key (9).