Assembly Instructions

- 4 -

STEP 2

Attach Front frame (C) to Side Rail (from Step 1) with bolts (1) and Curve Washers (4). Tighten with the Allen

Key (5). Place side stretchers (E) between front and back legs use the screw driver to tighten the screws (6).

Note: DO NOT tighten any of the bolts, until Place side stretcher (E) between front and back legs the chair is assembled, then

tighten the bolts and the screws.

STEP 3

Attach the Seat (B) to top of the seat frame (from Step 2) by using Screws (6). Tighten with a screw driver.

CHAIR WITH WOOD SEAT