ASSEMBLY INSTRUCTIONS Description : CHAIR WITH WOOD SEAT Dimension : W.17”1/2xD.20”xH.36” Cube Size : 37.7”x18.8”x9” NW: 28.
BEFORE ASSEMBLY Thank you for purchasing this quality product. This product has been designed for easy assembly and constructed for durability. Please take the time to read and follow the assembly instructions carefully. Be sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Please separate, identify, and count all parts and metal hardware. Compare with part list to be sure all parts are present.
HARDWARE LIST When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware: NO Description Qty Sketch NO Qty Sketch Flat Washer Bolt 1 Description 2 6 4 (ɸ6.5x13mm) (M6x50mm) Lock Washer 3 4 4 Curve Washer 2 6 Short Screw (M4x30mm) 10 (ɸ6.5x9mm) Allen Key 5 1 (4mm) STEP 1 Attach Side Rail (D-L) and (D-R) to the Back (A) with Bolts (1), and Washers (2) and (3).
STEP 2 Attach Front frame (C) to Side Rail (from Step 1) with bolts (1) and Curve Washers (4). Tighten with the Allen Key (5). Place side stretchers (E) between front and back legs use the screw driver to tighten the screws (6). Note: DO NOT tighten any of the bolts, until Place side stretcher (E) between front and back legs the chair is assembled, then tighten the bolts and the screws. STEP 3 Attach the Seat (B) to top of the seat frame (from Step 2) by using Screws (6). Tighten with a screw driver.
