Installation & Assembly

ASSEMBLY INSTRUCTIONS:

Bdb(B) -

1. CAREFULLY UNPACK AND PLACE ALL PARTS

ON A FLAT SURFACE AND LINE THEM UP AS

PER THE SKETCH.

2. SCREW BULB (B) INTO SOCKET OF LAMP BODY (A).

3. INSERT THE POLARIZED PLUG INTO WALL

OUTLET, TURN ON THE SWITCH AND ENJOY

YOUR NEW LAMP.

Lamp Body(A) -

USE 2PCS 11W CFL TYPE BULB OR 2PCS 40W (MAXIMUM) INCANDESCENT T TYPE BULB.

IMPORTANT SAFETY INSTRUCTIONS:

THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A

SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A

POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE

PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN

EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY INSERTED. DO NOT ATTEMPT

TO ALTER THE PLUG.

ATTENTION:

POUR PRÉ VE NIR LE S CHOCS É LE CT RIQUE S NE PAS UT ILISE R CE T TE FICHE POL ARISE E

AVE C UN PROLONG AT E UR, UNE PRISE DE COUR ANT OU UNE AUT RE SORT IE DE COUR ANT,

SAUF SI LE S LAME S PE UVE NT Ê T RE INSÉ RÉ E S AFOND SANS E N LAISSE R AU CUNE PART

IE À DÉ COUVE RT.

PLEASE INFORM YOUR DEALER IMMEDIATELY IN CASE OF ANY PARTS SHORTAGE.

& SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.