Installation & Assembly

Step 1
Chair Back
Step 2
Place the Chair Back(A) on a clean, non-marring surface.
Take out the two Wooden Legs and the package of Hardware accessories.
Put the Chair Back(A) onto a clean and flat table or surface.
Align the positioning dowels on the Chair Seat(B) with the mounting position
located on the Chair Back(A).
Use your left hand to push the seat frame floorwards, depicted by Arrow 1.
This action helps to ensure the Chair Seat(B) is pressed towards to the
Chair Back(A) with no gap between these.
Then, lock the middle mounting position first and then the corner mounting
positions using Bolts(a), Spring Washers(c) and Flat Washers(b) with Allen
Key(d).
At this point of assembly, DO NOT overfasten the connections.
Chair Seat
4 OF 7