Installation & Assembly

IMPORTANT

Do not tighten up all the screws until each part is properly assembled. You should keep Hex Wrench in the safe place as

you may need to tighten up the Head Cap Bolts in the future.

STEP 1

STEP 2

STEP 3

Attach the Divider (F) and another

Front Rail to the assembled unit.

Attach the Front Rail (D)

and Back Rail (E) to the

Side Frame (B).

Assembly Instructions 2/4

Turn the Side Frame (B) upside down

on the soft material.

Attach the locking caster to the leg with sign,

and the non-locking caster to the other leg.

Do the same for the Side Frame (C).

Head Cap Bolt

Locking Caster

Non-Locking Caster

Head Cap Bolt