Assembly Instructions

ManualsBrandsAlcott Hill ManualsFurnitureEwart Kitchen Island with Wood Top

Tools required for assembly : Phillips screwdriver

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occurring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Hardware List

Wood Plug

13 pcs. (+1 extra)

Side Frame

1 pc.

Hex Wrench

1 pc.

Caster

Two with lock and

Two non-locking

4 pcs.

M3.5x16

Wood Screw (short)

12 pcs. (+1 extra)

M3.5x25

Wood Screw (long)

16 pcs. (+1 extra)

Pull Handle

2 pcs.

M6x25

Head Cap Bolt (short)

2 pcs. (+1 extra)

Stainless Steel Top

Kitchen Cart

M4x25

Machine Screw

4 pcs.

(Please refer to the last page of these

instructions for drawer assembly.)

Top

1 pc.

Front Rail

2 pcs.

Side Frame

1 pc.

Back Rail

1 pc.

Divider

1 pc.

Base

1 pc.

Shelf

1 pc.

Side Bar

1 pc.

Drawer

2 pcs.

M6x35

Head Cap Bolt (long)

19 pcs. (+1 extra)

Adjustable Pin

4 pcs. (+1 extra)

ster

Small

Hex Wrench

1 pc.

Summary of content (4 pages)

PAGE 1
Stainless Steel Top Kitchen Cart IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occurring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List D. Front Rail 2 pcs. A. Top 1 pc. C. Side Frame 1 pc. B. Side Frame me 1 pc. E. Back Rail 1 pc. H. Shelf 1 pc.
PAGE 2
Assembly Instruction 2 / 4 IMPORTANT * Do not tighten up all the screws and bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Attach Front Rails (D) and Back Rail (E) to Divider (F) with Head Cap Bolts (long).
PAGE 3
Assembly Instruction 3 / 4 Head Cap Bolt (short) A Head Cap Bolt (long) STEP 3 Attach Side Bar (J) to unit with Head Cap Bolts (short). (See Figure 3) Place Top (A) onto the unit with Head Cap Bolts (long). (See Figure 4) I J I Insert Adjustable Pins into the side frames at the desired level and place Shelf (H) into position. (See Figure 5) Slide Drawers (I) into position. H Adjustable Pin Figure 3 Wood Plug STEP 4 Cover all holes with Wood Plugs.
PAGE 4
Assembly Instruction 4 / 4 Drawer (I) I1 I3 I4 I2 Figure 1 STEP 1 Attach I1 to I3 and I4, using a Phillips screwdriver and long wood screws (4X), tighten halfway. MAKE SURE ROLLER IS ON THE BACK I1 I3 I5 I4 Attach I2 to I3 and I4 using long wood screws (4X), tighten halfway. (See Figure 1) Figure 2 I2 STEP 2 Slide I5 into the grooves in I3 and I4. Push I5 all the way forward so it meets I1.