Specifications

6.3 Downloading New Version of Firmware to a Module
There may be circumstances where the firmware version of a module may need to be upgraded
in the field. The information in this section will describe the process of downloading a new
version of firmware from the Anitech Systems website and installing it into the module.
Verify Current Version –
Open the MP4000
software.
Click on the desired
module.
Module firmware
versions are displayed
in the Device
Information section of
the screen.
Download Firmware Code
From Website –
Visit the Anitech Systems
website (www.anitech-
systems.com).
Click on the Support
link.
Scroll to the correct module type.
Highlight and select the Firmware column.
Select the correct module version.
• Select the appropriate sub-file, this is dependant on the module revision level.
(Refer to File Name Conventions in the Media Pro 4000 manual, section 5.2.1,
for a detailed explanation of firmware file names.)
• When the file is selected, it needs to be saved to the disk. Since browsers vary,
refer to the brief, "Saving Files from a WebPage without
Displaying " in Section 6.1 of this manual.
♦ Enter the Directory and Filename information on the pop-up Menu and press
the Save button. The file will be saved to the disk.
Also, carefully read the most recent ReadMeMP.txt. It is found on the website at the
following address:
http://anitech-systems.com/MP4000/manual/briefs/ReadMeMP.txt
Exit the Website.