Specifications

5.4.1 Configuring Allen-Bradley
PC RSLinx RS232 DF1 Configuration
Note: You will need to Auto-Config initially and after reconfiguring the ML1500 Ch0
(Make these setting always match the current configuration in the ML1500)
Driver: RS232 DF1 Devices
Device: SLC/ML/PV (Ch0)
Baud Rate: 19,200 (must be 19.2K for Media Pro DF1 Master Protocol)
Parity: None (must be None for Media Pro DF1 Master Protocol)
Stop Bits: 1 (must be 1 for Media Pro DF1 Master Protocol)
Station #: 00 (This is the PC's station #)
Error Checking: BCC (must be BCC for Media Pro DF1 Master Protocol)
Protocol: Full Duplex