User guide

Control Protocols
Message Response:(current port)<0D>
Set command:(port A or B)NJ<0D>
Message Response:R<0D>
DHCP Enable
Description:This command will enable or disable the DHCP function and will get the
current status.
Comments: x is 0 = disable, 1 = enable
p is A = port A, B = port B
Get command:pDH<0D>
Message Response:x<0D>
Set command:xpDH<0D>
Message Response:R<0D>
HTTP Ethernet Port
Description:This command will get or set the Ethernet port that will be used in con-
necting to the Internet
Comments: p = A/B Ethernet jack locations on the V16Pro
Get command:HJ<0D>
Message Response:x<0D>
Set command:(A or B)HJ<0D>
Message Response:R<0D>
HTTP WEB Page
Description:This command will get or set the default HTTP WEB address.
Comments: The default WEB page is index.html
Get command:HP<0D>
Message Response:(currentwebpage)<0D>
Set command:(myWebPage.html)HP<0D>
Message Response:R<0D>
sage sent from an PC (address 0xFF) to a LightCuePro on Universe 1.
- 41 -