User guide

Chapter 2
Set command:1DT<0D>
Message Response:R<0D>
Time Zone
Description:This command will get or set the Time Zone.
Comments: The time zone 0 is the Greenwich Mean Time GMT. Time zones going
west are given –1 numbers and +1 going east from GMT 0 until the International Date
Line is reached. Eastern TZ in the USA is -5
Get command:TZ<0D>
Message Response:current timezone<0D>
Set command:-5TZ<0D>
Message Response:R<0D>
NTP IP Address
Description:This command will get or set the NTP IP address needed to contact the
timeserver.
Get command:NI<0D>
Message Response:(current NTP address)<0D>
Example:Send Command:NI<0D>
Response:ntp.org<0D>
Set command:"NTP IP address"NI<0D>
Message Response:R<0D>
NTP Enable
Description:This command will enable or disable the NTP function and will get the
current status.
Comments: 0 = disable, 1 = enable
Get command:NE<0D>
Message Response:(current status)<0D>
Set command:(0 or 1)NE<0D>
Message Response:R<0D>
Ethernet Port for NTP
Description:This command will get or set the V16Pro Ethernet port used to contact the
NTP server.
Comments: A = port A, B = port B. The default port is A
Get command:NJ<0D>
- 40 -