User guide

Control Protocols
Description:This command will get or set the time of day.
Comments: hh:mm:ss Hours/Minutes/Seconds.
Get command:TI<0D>
Message Response:hh:mm:ss<0D>
Set command:hh:mm:ssTI<0D>
MessageResponse:R<0D>
User Name
Description:This command will get or set the user login name.
Comments: The default name is admin.
Get command:US<0D>
Message Response:(current login)<0D>
Set command:(new login)US<0D>
Message Response:R<0D>
Get/Set Password
Description:This command will get or set the password.
Comments: The default password is password.
Get command:PW<0D>
Message Response:password<0D>
Set command:passwordPW<0D>
Message Response:R<0D>
DST Enable
Description:This command will get or set the status of the daylight saving time param-
eter.
Comments: 0 = Standard Time, 1 = using DST.
Get command:SD<0D>
Message Response:current setting<0D>
Set command:1SD<0D>
Message Response:R<0D>
DST Type
Description:This command will get or set the status of the daylight saving time Type.
Comments: Example are: 1 = US, 2 = Universal, 3 = Australia, 4 = Europe.
Get command:DT<0D>
Message Response:current setting<0D>
- 39 -