User guide

Chapter 2
IP address
Description:This command will get or set the selected port IP address. Port A or B
may be selected
Comments: Where xxx is a decimal number in the range of 0 – 255.
Get command:(A or B)IP<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxx(A or B)IP<0D>
Message Response:R<0D>
Subnet Mask number
Description:This command will get or set the number used to isolate the subnet.
Comments: xxx is a decimal number in the range of 0 – 255.
Get command:SM<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxxSM<0D>
Message Response:R<0D>
Gateway IP Address
Description:This command will get or set the IP address of the gateway the unit will
connect through.
Comments: xxx is a decimal number in the range of 0 – 255.
Get command:GW<0D>
Message Response:xxx.xxx.xxx.xxx<0D>
Set command:xxx.xxx.xxx.xxxGW<0D>
Message Response:R<0D>
Date
Description:This command will get or set the calendar date.
Comments: mm/dd/yyyy Month/Day/Year.
Get command:DA<0D>
Message Response:mm/dd/yyyy<0D>
Set command:mm/rr/yyyyDA<0D>
Message Response:R<0D>
Time
- 38 -