User guide

Control Protocols
Description: When set to 1, the LightCue Pro is in "Last Takes Priority" mode. Regard-
less of whether the DMX Value is higher or not, the last piled on value for that channel
will be applied.
Command bytes:nPP<CR
n = 1 – Last Takes Priority
n = 0 – Highest Takes Priority
Message Response:R<CR>
Longitude
Description:This command will get or set the longitude coordinates.
Get command:LN<0D>
Message Response:current value<0D>
Example:
Send Command:LN<0D>
Response:81.0<0D>
Set command:81.0LN<0D>
Message Response:R<0D>
Latitude
Description:This command will get or set the latitude coordinates.
Get command:LA<0D>
Message Response:current value<0D>
Example:
Send Command:LA<0D>
Response:28.0<0D>
Set command:28.0LA<0D>
Message Response:R<0D>
Reboot
Description:This command will perform a hard reboot of the system.
Comments: The V16Pro will reload and run the selected script. The normal power on
response will apply
Command:XX<0D>
Message Response:K<0D> (after reboot complete)
- 37 -