User guide

Chapter 2
Clear Forces
Description: Clear any forces that are in place
Command bytes:UuFC<h0D>
u – the Universe number. Use * for all.
Message Response:R<CR>
SMPTE Status
Description: This command causes the Light Cue Pro to respond with the current
status time and state of the SMPTE interface.
Command bytes:SS<CR>
Message Response:status hh:mm:ss.ff<CR>
status is either: "Awaiting SMPTE", "Running", "Paused", "Idle" or "Error"
Example:Running 01:00:20.30 <CR>
DMX File Query
Description: This command causes the Light Cue Pro to respond with the dmx files
currently playing. The word "none" is returned if no cues are playing.
Command bytes:UuCC<CR>
u – the Universe number.
Message Response:"ccccccc.ccc" , "ccccccc.ccc" <CR>
where "ccccccc.ccc" is the ASCII representation of the file currently playing on that
Universe separated by commas
Example:"dmx00001.dmc","dmx00002.dmc" <CR> Cue numbers 1, & 2 are playing
None<CR>no cues are playing (unit is idle)
Reset
Description: This command causes the LightCue Pro to stop the playback of all active
cues and hold the current look.
Command bytes:UuRJ<CR
u – the Universe number. Use * for all.
Message Response:R<CR>
Pile-On Priority
- 36 -