User guide

Control Protocols
Description: This command causes the Light Cue Pro to pass the data from the input
DMX connector to the output, bypassing the data recorded in the unit. Playback of
recorded data will continue if it was in progress when this command was received,
however the data will not be output.
Command bytes:nUuFT<CR>
If n=1 feedthrough is actvated
If n=0 feedthrough is deactivated
u – the Universe number. Use * for all.
Message Response:R<CR>
Comments: "Feedthrough" will display on the main front LCD screen for the cor-
responding universe when activated.
Example:"1U*FT" <CR> feedthrough is activated on all Universes
“0U1FT”<CR>feedthrough is deactivated on Universe 1
Force Value
Description: Force a DMX channel to specified value.
Command bytes:cccvvvUuFV<CR>
ccc - ASCII representation of the channel number 1 to 512.
vvv - ASCII representation of the channel value 000 to 255.
u – the Universe number. Use * for all.
Message Response:R<CR>
Example:"255128U*FV" <CR>
forces channel 255 to value 128 on all Universes
Force DMX
Description: Force an entire set of DMX channels to specified value.
Command bytes:nvvv....vvvUuFD<h0D>
n - 0 for first 128 channels, 1 for second 128 channels, 2 for the third 128 channels, 3
for forth
vvv.....vvvvvv - the ASCII representation of the channel value 000
to 255 listed 128 times.
u – the Universe number. Use * for all.
Message Response:R<CR>
- 35 -