User guide

LightCue Manager
dmx file editor to view the individual channel and DMXvalue information.
Put DMX File on Flash Card
Transfer a file using FTP to the LightCue. The transfer will take place after the file
is selected from your hard drive using the dialog that appears.
File on Flash Card
The name of the file that contains the DMXdata information. This is usually
attached to a Cue Name (See "Cue Names Window"
Channels effected by Playback
When the DMXfile was recorded, certain channels were selected. When the file
is played back, only those DMXchannels will be effected.
Universe Recorded
This only applies to LightCue products with more than 1 universe (such as the
LightCuePro 4 universe player). This shows the universe on which the file was
originally recorded, but it can be played back on any desired universe.
Total File Run Time
The length of the DMX data. For SMPTErecorded files, this is only the length and
does reflect the actual SMPTE stop time.
SMPTE Recorded Start Time
The first recorded timestamp in the file. Saved using the SMPTEduring record.
- 21 -