User guide
LightCue at a Glance
Parallel I/O
37-pin female connector for inputs and outputs.
Inputs: 8 opto isolated inputs can be configured to be either Voltage or Contact
Closure inputs. Just like the buttons, the inputs are fully configurable using the
LightCue Manager software.
Ouputs: 2 contact closure "Fault"and "Running"outputs automatically toggle dur-
ing cue playback or on error.
For complete Pinout, See "Parallel (DB37) Pins".
SMPTE / LTC In
Female 3-Pin XLR. Ttransformer coupled 600 ohm Balanced -10 dbu to +4 dbu
Supported Frame Rates:
24,25,29.97,29.97drop,30
Serial RS-232 Control
RS-232C at 9600 Baud, N, 8, 1
Ethernet Control
UDPcontrol on port 2639 is used by LightCue Manager. FTPfile transfer and
HTTPwebpage view is also available. See "Control Protocol"for more detail on
UDPstrings.
Front Panel LCD
- 5 -