Specifications

Page 8 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
Playback
Note:
Playback can
also be accomplished
using a Serial, USB, or
Ethernet command
from
a PC or other device.
See the
“Serial/Ethernet/USB
Control” section.
From the Cue Manger Software (See LightCue Manager
section)
1. Click "Edit" from the top toolbar
2. Select the Cue Name or DMX File you wish to play
3. Press “Play Now”
From the Front Panel
1. Press in on the knob to bring up to the Main Menu
2. Select “Play” and press in
3. Select the Universe you wish to play and press in on knob
4. Select the Cue Number by Highlighting the number and
pressing in on the knob to cause the number to blink.
5. Turn the knob as needed to get the appropriate cue number
6. Press the knob again to accept the cue number
7. Highlight and Press the “Play Now”
Show Controller Connection
1. Connect the output port on your Show Controller (e.g. Alcorn
McBride V16Pro, V4Pro) to the Controller Input on the rear of
the Light Cue Pro using serial or ethernet connection.
2. Use the Controller Software (e.g. WinScriptLive) to configure
and operate the Light Cue Pro.