Specifications

Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010 Page 39
Message Response: (current NTP address)<0D>
Example: Send Command: NI<0D>
Response: ntp.org<0D>
Set command: "NTP IP address"NI<0D>
Message Response: R<0D>
NTP Enable
Description: This command will enable or disable the NTP function and will get
the current status.
Comments: 0 = disable, 1 = enable
Get command: NE<0D>
Message Response: (current status)<0D>
Set command: (0 or 1)NE<0D>
Message Response: R<0D>
Ethernet Port for NTP
Description: This command will get or set the V16Pro Ethernet port used to
contact the NTP server.
Comments: A = port A, B = port B. The default port is A
Get command: NJ<0D>
Message Response: (current port)<0D>
Set command: (port A or B)NJ<0D>
Message Response: R<0D>
DHCP Enable
Description: This command will enable or disable the DHCP function and will
get the current status.
Comments: x is 0 = disable, 1 = enable
p is A = port A, B = port B
Get command: pDH<0D>
Message Response: x<0D>
Set command: xpDH<0D>
Message Response: R<0D>
HTTP Ethernet Port
Description: This command will get or set the Ethernet port that will be used in
connecting to the Internet
Comments: p = A/B Ethernet jack locations on the V16Pro