Specifications

Page 38 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
PW Get/Set Password
Description: This command will get or set the password.
Comments: The default password is password.
Get command: PW<0D>
Message Response: password<0D>
Set command: passwordPW<0D>
Message Response: R<0D>
DST Enable
Description: This command will get or set the status of the daylight saving time
parameter.
Comments: 0 = Standard Time, 1 = using DST.
Get command: SD<0D>
Message Response: current setting<0D>
Set command: 1SD<0D>
Message Response: R<0D>
DST Type
Description: This command will get or set the status of the daylight saving time
Type.
Comments: Example are: 1 = US, 2 = Universal, 3 = Australia, 4 = Europe.
Get command: DT<0D>
Message Response: current setting<0D>
Set command: 1DT<0D>
Message Response: R<0D>
Time Zone
Description: This command will get or set the Time Zone.
Comments: The time zone 0 is the Greenwich Mean Time GMT. Time zones
going west are given –1 numbers and +1 going east from GMT 0
until the International Date Line is reached. Eastern TZ in the
USA is -5
Get command: TZ<0D>
Message Response: current timezone<0D>
Set command: -5TZ<0D>
Message Response: R<0D>
NTP IP Address
Description: This command will get or set the NTP IP address needed to contact
the timeserver.
Get command: NI<0D>