Specifications

Page 36 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
Get command: LN<0D>
Message Response: current value<0D>
Example:
Send Command: LN<0D>
Response: 81.0<0D>
Set command: 81.0LN<0D>
Message Response: R<0D>
Latitude
Description: This command will get or set the latitude coordinates.
Get command: LA<0D>
Message Response: current value<0D>
Example:
Send Command: LA<0D>
Response: 28.0<0D>
Set command: 28.0LA<0D>
Message Response: R<0D>
Reboot
Description: This command will perform a hard reboot of the system.
Comments: The V16Pro will reload and run the selected script. The normal
power on response will apply
Command: XX<0D>
Message Response: K<0D> (after reboot complete)
IP address
Description: This command will get or set the selected port IP address. Port A
or B may be selected
Comments: Where xxx is a decimal number in the range of 0 – 255.
Get command: (A or B)IP<0D>
Message Response: xxx.xxx.xxx.xxx<0D>
Set command: xxx.xxx.xxx.xxx(A or B)IP<0D>
Message Response: R<0D>
Subnet Mask number
Description: This command will get or set the number used to isolate the subnet.
Comments: xxx is a decimal number in the range of 0 – 255.