Specifications

Page 34 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
Force Value
Description: Force a DMX channel to specified value.
Command bytes: cccvvvUuFV<CR>
ccc - ASCII representation of the channel number 1 to 512.
vvv - ASCII representation of the channel value 000 to 255.
u – the Universe number. Use * for all.
Message Response: R<CR>
Example: "255128U*FV" <CR>
forces channel 255 to value 128 on all Universes
Force DMX
Description: Force an entire set of DMX channels to specified value.
Command bytes: nvvv....vvvUuFD<h0D>
n - 0 for first 128 channels, 1 for second 128 channels, 2 for the
third 128 channels, 3 for forth
vvv.....vvvvvv - the ASCII representation of the channel value
000
to 255 listed 128 times.
u – the Universe number. Use * for all.
Message Response: R<CR>
Clear Forces
Description: Clear any forces that are in place
Command bytes: UuFC<h0D>
u – the Universe number. Use * for all.
Message Response: R<CR>
SMPTE Status
Description: This command causes the Light Cue Pro to respond with the
current status time and state of the SMPTE interface.
Command bytes: SS<CR>
Message Response: status hh:mm:ss.ff<CR>