Specifications

Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010 Page 33
Clear Cue
Description: This command causes the Light Cue Pro to clear a cue which is
currently being piled-on. The cue will be taken out of the
comparison.
Command bytes: nnnUuCL<CR>
nnn – the Cue number to remove
u – the Universe number. Use * for all.
Message Response: R<CR>
Example: "001U*CL" <CR> Clear Cue Number 1 from all Universes
“3U1CL”<CR> Clear Cue Number 3 from Universe 1
Feedthrough
Description: This command causes the Light Cue Pro to pass the data from the
input DMX connector to the output, bypassing the data recorded in
the unit. Playback of recorded data will continue if it was in
progress when this command was received, however the data will
not be output.
Command bytes: nUuFT<CR>
If n=1 feedthrough is actvated
If n=0 feedthrough is deactivated
u – the Universe number. Use * for all.
Message Response: R<CR>
Comments: "Feedthrough" will display on the main front LCD screen for the
corresponding universe when activated.
Example: "1U*FT" <CR> feedthrough is activated on all Universes
“0U1FT”<CR> feedthrough is deactivated on Universe 1