Specifications

Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010 Page 13
Playback Cues in LightCue Manager
Files can also be played
back using the "Cue
Names" or "DMX Files
"
window's "Play" button.
To Play an individual
file on 1 universe only,
select the "Individual
File" radio button.
In LightCue Manager, the "Play" window is present when the top
toolbar is in the "Edit" view and the bottom tab "Play" is clicked.
To Play a Cue Name:
1. Type the Cue Name into the "Cue Name or Cue List" box.
2. Select from the following options:
Pile On: Do not stop playing other cues when the new cue is
played. Up to 40 cues may be piled on. (See "Settings" to select
Highest Takes Priority or Last Takes Priority method of pile on)
Loop: Loop cue after cue file finishes playback
Follow SMPTE: Compare incoming timecode with current DMX
File time to determine current look.
SMPTE Start Time: The time of that the first frame of the DMX
File data should start playing back.
Fade-In Time: The amount of time to fade before the Cue Name or
DMX File is played back. Fades from current look to first look in
DMX File.
Monitor DMX Channels
Hint: Go to the menu:
Tools-->Options to
display a DMX channel
value in percent or 0-
255 value
In LightCue Manager, DMX channels on all 4 universes can be
easily watched from the "Monitor Screen" (shown below).