Specifications

Page 12 Alcorn McBride Light Cue Pro User’s Guide • July 15, 2010
To Select multiple DMX
Channels, use the
"CTRL" & "SHIFT"
keys along with the
mouse drag
Channel Sets are stored
on the user PC but can
be transfered to the
LightCuePro's compact
flash card
To save a channel set:
1. Type the desired name into the "Channel Set" box
2. Check the "Enable" boxes to select which universes and
channels to record.
3. Type in specific channels or click the "..." button to specify a
specific range of channels.
4. Click "Save"
To recall a saved channel set:
1. Select the desired name in the "Channel Set" box
2. Click "Load"
Channel Sets can later be recalled to highlight a specific set of
channels on a specific area in the 'Monitor' screen. (shown below)
Change the "Highlight Channel Set" combo in the top right
corner of the screen to cause certain channels to be highlighted in
yellow.