User`s guide

Command Summary 41
Command
Summary
string<CR>
Current File [<ID>@]c?C<CR> n<CR> c= channel n=file name
Current Status [<ID>@]?P<CR> n<CR> c= channel n=file name
Play [<ID>@]cPL<CR> R<CR> upon
receipt
Automatically stops at end of
clip.
c= channel
Pause [<ID>@]cPA<CR> R<CR> Picture remains on screen.
c= channel
Still [<ID>@]cST<CR> R<CR> Picture remains on screen
c= channel
Stop [<ID>@]cRJ<CR> R<CR> Picture remains on screen
c= channel
Search by file number [<ID>@]ncSE<CR>
[<ID>@]nncSE<CR>
[<ID>@]nnncSE<CR>
[<ID>@]nnnncSE<CR>
[<ID>@]nnnnncSE<CR>
R<CR> Only file number 0-99999
addressing is supported.
(not frames or time). ‘n’ is the
file number .
c= channel
Search by file name
Also supported:
PL, LP, PN, LN
[<ID>@]”<filename>” SE <CR> R<CR> Searches by file name instead
of number (no channel
required)
Loop [<ID>@]cLP<CR> R<CR> Play and loop at end of file
c= channel
PlayNext [<ID>@]ncPN<CR> R<CR> upon
receipt
Automatically plays this file at
the end of current clip.
c= channel * not supported.
LoopNext [<ID>@]ncLN<CR> R<CR> Automatically loops this file at
the end of current clip.
c= channel * not supported.
System Command [<ID>@]mSC<CR> R<CR> m= DOS command to execute
Access All [<ID>@]AA<CR> R<CR> Makes log files readable via
FTP.
Configuration
Set IP Address [<ID>@]nnn.nnn.nnn.nnnIP<CR
>
R<CR> n=IP address entries
Set Gateway
Address
[<ID>@]nnn.nnn.nnn.nnnGW<R
>
nnn.nnn.nnn.nn
n<CR>
n=Gateway address entries
Set Subnet Mask [<ID>@]nnn.nnn.nnn.nnnSM<R> nnn.nnn.nnn.nn
n<CR>
n= Subnet Mask entries
Set
DomainNameServer1
[<ID>@]nnn.nnn.nnn.nnnD1<R> R<CR> n= DNS entries primary
address
Set
DomainNameServer2
[<ID>@]nnn.nnn.nnn.nnnD2<R> R<CR> n= DNS entries secondary
address
Set Password
[<ID>@]mPW<CR> R<CR>
m= new password
Set Device ID [<ID>@]nID<CR>
[<ID>@]nnID<CR>
[<ID>@]nnnID<CR>
R<CR> n=ASCII Device ID (‘0’-
‘126’)
Set Time Zone [<ID>@]nID<CR> R<CR> n= number of hours behind
UTC (ex. Orlando is 5TZ)