User`s manual

Alcorn McBride Digital Video Machine DVM-7400 User’s Manual Rev 1.5
25
Loop File
Description: This command is the same as the Loop command, except that the file number or
name is included in the command. This means that no prior Select File command is
required.
Command bytes: nnnnnLP or “<filename>”LP
Parameters: nnnnn is the ASCII file number between 0-99999.
<filename> is an ASCII file name surrounded by quotation marks.
Message Response: R
Examples: Loop file 215: 215LP
Loop file 4: 4LP or “vid00004.mpg”LP
Loop file alcorn.mpg: “alcorn.mpg”LP
Play Next
Description: This command causes the specified file to be "queued" for playback at the completion
of the current activity. If a file is currently playing, the queued transition to the
selected file will be seamless. If a file is currently looping, the seamless transition will
occur at the next loop point.
Command bytes: nnnnnPN or “<filename>”PN
Parameters: nnnnn is the ASCII file number between 0-99999.
<filename> is an ASCII file name surrounded by quotation marks.
Message Response: R
Example: Play File 1: 1PL
Play File 2 when File 1 is complete: 2PN
Loop Next
Description: This command causes the specified file to be "queued" for looping playback at the
completion of the current activity. If a file is currently playing, the queued transition to
the selected file will be seamless. If a file is currently looping, the seamless transition
will occur at the next loop point.
Command bytes: nnnnnLN or “<filename>”LN
Parameters: nnnnn is the ASCII file number between 0-99999.
<filename> is an ASCII file name surrounded by quotation marks.
Message Response: R
Example: Play File 1: 1PL
Loop File 2 when File 1 is complete: 2LN