User`s guide

2 Welcome
General Command Summary
Don’t need all the details? Here is a simple table of all supported Pioneer / AMI
commands supported by the DVMHD.
Ethernet Control
Here, you will find the details associated with controlling the DVMHD via
Ethernet using simple UDP packets.
Serial Control
This section describes how to use RS-232 to control and communicate with the
DVMHD.
Playlists
Playlists are lists of DVMHD commands, including video playback, audio/video
mute, etc. to be executed in order. This section describes the DVM Playlist
syntax, as well as sample Playlists to get you started.
Schedules
Schedules are used to issue commands to the DVMHD at specific dates and
times. This section will go into detail about how to create schedules, and will
also provide sample schedules.
Networking Your DVMHD
A simple guide that instructs you how to connect to the DVMHD over Ethernet.
A great deal of features can be accessed through this interface.
Transferring Files to the DVMHD
This section explains several methods for transferring video, schedule, and
playlist files to the DVMHD.
Creating DTV Clips
Having a user-friendly and reliable playback device is only half of the HD
puzzle. This section describes the necessary steps and specifications for creating
High Definition video and multi-channel audio content for the DVMHD.
Updating Operating System
This is a simple step-by-step guide on updating the DVMHD firmware and OS.
Troubleshooting
The DVMHD was designed for an extremely high level of reliability, but if
problems or questions arise, check out this section for a quick answer or
solution.