User`s guide

44 Networking Your DVMHD
12. Upon hitting the Enter key on your keyboard, you should be presented with
the introductory Web Page from your DVMHD. This is proof that you have
successfully established an Ethernet connection with your DVMHD.
Connecting to the DVMHD Over a Local Area
Network (LAN)/The Internet
Note: This process can only be accomplished once you have already
connected to the DVMHD directly and have changed the default IP address
to an address approved by your Network Administrator.
To connect to the DVMHD over a LAN or the Internet:
1. Connect one end of a 10-Base-T Ethernet cable to the Ethernet connector on
the DVMHD. DO NOT USE THE SUPPLIED RED “NULL-
ETHERNET” CABLE.
2. Connect the other end of the Ethernet cable to your network hub.
3. On your computer, launch a Web Browser (Netscape, Internet Explorer,
etc.).
4. In the address box, type “http://” followed by the IP address of your
DVMHD.
Upon hitting the Enter key on your keyboard, you will be presented with the
introductory Web Page from your DVMHD.