User`s guide

ManualsBrandsAlcorn Mcbride ManualsDVD PlayerDigital Video Machine 4

General Command Summary 27

Subnet Mask Request SM<CR> xxx.xxx.xxx.xxx<CR>

Gateway Request GW<CR> xxx.xxx.xxx.xxx<CR>

Unit ID Request ID<CR> Unit ID<CR>

Set IP Address xxx.xxx.xxx.xxxIP<CR> R<CR>

Set Subnet Mask xxx.xxx.xxx.xxxSM<CR> R<CR>

Set Gateway xxx.xxx.xxx.xxxGW<CR> R<CR>

Set Unit ID nID R<CR> n=Unit ID (0-126)

Set Time Zone [<ID>@]nTZ<CR> R<CR> n= number of hours behind UTC

(ex. Orlando is 5TZ)

Set Longitude [<ID>@]nLO<CR> R<CR> n= longitude

ex. 26LG, n26LG, -15LG, s15LG

Set Latitude [<ID>@]nLA<CR> R<CR> n= latitude

ex. 26LA, w26LA, -15LA, e15LA

Set Time [<ID>@]mTI<CR> R<CR> m=hh:mm:ssTI

(ex. 01:02:56TI) - military time

Set Date [<ID>@]mDA<CR> R<CR> m=mm/dd/yyyy

(ex.12/12/2003DA) use slashes,

dashes or periods. 2-digit years

are accepted also.

Set Daylight Saving Time

Support On/Off

[<ID>@]nSD<CR> R<CR> n= 1 use DST

n= 0 don’t use DST

Set Daylight Saving Time Type [<ID>@]nnnDT<CR> R<CR> nnn = USA, UTC, or AUS for

now. Other DST's can be added on

request.

Set Scheduler Bootup Delay [<ID>@]nBD<CR> R<CR> n= number of seconds before

scheduler starts after reboot

Set Password

[<ID>@]xPW<CR>

x = a string password

Get IP Address [<ID>@]IP<CR> IP String<CR>

Get Gateway Address [<ID>@]GW<CR> DefaultGateway<CR>

Get Subnet Mask Request [<ID>@]SM<CR> Subnet Mask <CR>

Get Device ID [<ID>@]ID<CR> ID String<CR>

Get Time Zone [<ID>@]TZ<CR> Timezone<CR>

Get Longitude [<ID>@]LO<CR> Longitude <CR>

Get Latitude [<ID>@]LA<CR> Latitude <CR>

Get Time [<ID>@]TI<CR> Time<CR>

Get Date [<ID>@]DA<CR> Date<CR>

Get DST support [<ID>@]SD<CR> n<CR> n= 1 using DST

n= 0 not using DST

Get DST Type [<ID>@]DT<CR> DST Type<CR> USA, UTC, or ASU currently. Other

DST's can be added on request.

Get Scheduler Bootup Delay [<ID>@]BD<CR> n<CR> n= number of seconds before

scheduler starts after a reboot

Get Scheduler Activity Logging [<ID>@]SL<CR> n<CR> n= 1 updating schedulerlog.txt

n= 0 not using log

Serial Port Specific

Serial String [<ID>@]mSS<CR> R<CR> m=string to send

Logging

Schedule Logging On/Off [<ID>@]nSL<CR> R<CR> n=0 Logging Off

n=1 Logging On