User`s guide

Rear Panel 11

Rear Panel

The Digital Video Machine HD rear panel provides connections for audio/video

outputs, control cables, and power.

Power Switch

The DVMHD is “ON” when this switch is in the UP position (labeled “|”).

NOTE: When power-cycling the DVMHD, please wait 5-10 seconds before

turning the unit ON.

Unbalanced Audio Connectors

These 2 RCA-type phono connectors output a decoded version of the PCM or

MPEG audio stream. If any other stream type, including Dolby Digital surround

is played, no audio is output on these connectors. Dolby Digital Bitstream is

output from the Digital Audio Connector. You can connect a Dolby Digital

Bitstream Decoder to separate the channels.

Digital Audio Connector

This three-pin XLR connector provides the AES/EBU digital audio output.

During playback, if audio is present in the clip, the compressed bitstream is

output in AES/EBU packets. If Dolby Digital Bitstream is present in the clip,

then it is emitted on this connector. You can connect a Dolby Digital Bitstream

Decoder to separate the channels. If no audio is present, no data is output.

Pin Signal

Shield

2 +

3 -