User`s guide

90 Command Files
During a media update, the green LED on the left, front panel will continue to
flash just as it was before the update began. The yellow LED just below the
green will begin to flash along with it in an alternating pattern. Once the update
has completed, the DVM2 will finish the “ Traffic Light” LED sequence. After
this sequence, it is safe to remove the CD/DVD-ROM disk from the drive.
There is no real need to remove the media update, however, because the DVM2
checks the date and time of any removable media files to be copied against those
already on the disk and will not update the same files again at the next power
cycle. Only when a new media update is placed in the DVD-ROM drive and the
unit is power cycled will another update take place.
Just insert the
media update,
power cycle
and you’re
done!
All updates from the DVD-ROM drive will take place before any other power-up files are
processed. This means that updates to a Real Time Scheduler file or a playlist #0 will take effect
as soon as the update finishes without having to cycle power again.