User`s guide

86 Soft Reboot
Soft Reboot
This performs a reboot just like the one achieved when recycling power.
DVM2 Hardware Requirements
The DVM2 requires a hardware upgrade to implement the soft reboot option. If
you try the serial or web reboot commands below and the hardware is NOT
upgraded yet, you’ll get an informational message telling you that you need to
have it upgraded for the feature.
How to cause a soft reboot of the unit:
• Pioneer serial command: XX<carriage return>
• Ethernet UDP command: XX<carriage return>
• Web page support: Remotely Reboot by pressing a web button on the
Maintenance page
• Scheduler supported Reboot the DVM2 at a certain time of the week.
(read more in scheduler section)
• FTP client script "REBOOT" entry at bottom of script. Don’t use QUIT
then REBOOT. Just use REBOOT. It quits the session for you and
then reboots.