User`s guide

Networking Your DVM2 61
Networking
Your DVM2
Forgotten Password or IP Address?
If you have forgotten your User Name, Password and/or IP Address, you will
not be able to connect to your machine remotely to solve the problem. You will
be required to toggle the Password Reset switch (Switch #6) on the rear panel
of the DVM2 and power-cycle the unit to return the User Name, Password, and
IP Address to their defaults.
After turning on the Password Reset switch, simply power-cycle the DVM2.
When it returns to its ready state, turn the Password Reset switch to the “ Off”
position.
This will reset the User Name to “ admin”, the Password to “ password”, and the
IP Address to 192.168.0.254. You will need to go back through the setup
procedures to change these to new values.
WARNING: Any person who has access to the DVM2 and this manual will
be able to reset the User Name, Password, and IP Address. You must keep
these items secure to prevent tampering!