User`s guide

54 Networking Your DVM2
Connecting to the DVM2 Over a Local Area
Network (LAN) or the Internet
Note: This process can only be accomplished once you have already
connected to the DVM2 directly and have changed the default IP address to
an address approved by your Network Administrator.
To connect to the DVM2 over a LAN or the Internet:
1. Connect one end of a 10-Base-T Ethernet cable to the Ethernet connector on
the DVM2. DO NOT USE THE SUPPLIED RED “NULL-
ETHERNET” CABLE.
2. Connect the other end of the Ethernet cable to your network hub.
3. On your computer, launch a Web Browser (Netscape, Internet Explorer,
etc.).
4. In the address box, type “http://” followed by the IP address of your DVM2.
Upon hitting the Enter key on your keyboard, you will be presented with the
introductory Web Page from your DVM2.