User`s guide
Serial Control 33
Serial
Control
Device ID Request
Description: This command causes the Digital Video Machine 2 to report its current Device
ID.
Command bytes: [<ID>@]ID<CR>
Message Response: Device ID String<CR>
Firmware Version Request
Description: This command causes the Digital Video Machine 2 to report its Operating
System revision number.
Command bytes: [<ID>@]?V<CR>
Message Response: Version String<CR>
IP Address Set
Description: This command causes the Digital Video Machine 2 to set its IP address. You
can also do this via the web interface.
Command bytes: [<ID>@]nnn.nnn.nnn.nnnIP<CR>
Message Response: IP String<CR>ξ
IP Address Request
Description: This command causes the Digital Video Machine 2 to get its IP address.
Command bytes: [<ID>@]IP<CR>
Message Response: IP String<CR>ξ
File List Request
Description: This command causes the Digital Video Machine 2 to report the list of files
located on its root drive. This is handy, if you donβ t have an Ethernet
connection established and you want to see what files are on the root drive.
Command bytes: [<ID>@]LS<CR>
Message Response: ASCII dump of root directory files <CR>
Gateway Address Set
Description: This command causes the Digital Video Machine 2 to set its Gateway address.
You can also do this via the web interface.
Command bytes: [<ID>@]nnn.nnn.nnn.nnnGW<CR>
Message Response: Gateway IP String<CR>ξ