User`s guide

Rear Panel 27
Rear
Panel
YUV Output
The Digital Video Machine 2 also supports YUV output through the RGB
connector. When the DVM2 is in YUV mode, pin 1 is “ Y”, pin 2 is “ U” and pin
3 is “ V”.
Ethernet Connector
This RJ-45 connector provides connection for a standard 10-Base T Ethernet
cable. This cable would normally be connected to a hub, but may also be
connected directly to a PC’s Ethernet card using an Ethernet null, or “ cross-
connect” cable, which is included with the DVM2.
Ethernet is the primary mechanism for transfer of video data into the DVM2,
and may also be used for control and monitoring. The DVM2 is shipped with a
factory default IP address of 192.168.0.254, which is useful for transferring
video across an Ethernet LAN, but must be changed if the Digital Video
Machine 2 is to be connected to a router on the Internet. Refer to the
Networking Your DVM2 section of this document for more information.