User`s guide

Rear Panel 13
Rear
Panel
Rear Panel
The Digital Video Machine 2 rear panel provides connections for all of the
audio and video outputs, control cables, and power. There are also two banks of
configuration switches located here.
Power Switch
The DVM2 is “ On” when this switch is in the “ Up” position, labeled “ |”.
NOTE: When power cycling the DVM2, please wait 5 seconds before turning
power back on.
Power Connector
The power input connector is a 5 pin circular DIN connector with the following
pinout.
Pin Function
1 Common
2 N/C
3 +5 VDC, 3 Amps Max
4 -12 VDC, 0.3 Amp Max
5 +12 VDC, 2 Amps Max
An external UL Class 2 and CE compliant power adapter is provided, which can
operate from 100 to 250 VAC at 50 to 60 Hz, consuming 0.7-0.3 amps.