User`s guide

Getting Started 9
Getting
Started
To copy playlist 0 to the DVM2 from
your hard drive, type put
ply00000.lst. Press Enter. When the
FTP> prompt is shown again, you
know the transfer is complete. Type
ls. Press Enter. Playlist 0 is now
shown on the DVM2’ s hard drive (not
shown—see above).
To exit DOS FTP, type quit. Press
Enter. To exit DOS, type exit and
press Enter. Take it from here. Be
careful, and understand the commands
that you’re using before doing
anything crazy.
Multiple DVM2’s with Same IP
Address:
If you use the same computer to talk to several DVM2’ s straight from the
factory, you’ll need to do the following:
Each time you communicate over Ethernet with a different DVM2, open a DOS
window. Type arp -d 192.168.0.254 Press Enter. (This is assuming the
DVM2 is set up to the default IP address). It clears away old IP address
relationships that can cause problems like delays while connecting when using
FTP, web browsers, etc… Once you change your IP Addresses for the DVM2’ s,
you won’t have to do this anymore.
Most Importantly!
Read the rest of this manual. Information like how to name your files, the
power of playlists, serial control, etc… are all right at your fingertips. The few
minutes you invest will save you hours of time. Enjoy!