User`s guide

60 Networking Your DVM4
Connecting to the DVM4 Over a Local Area
Network (LAN) or the Internet
Note: This process can only be accomplished once you have already
connected to the DVM4 directly and have changed the default IP address to
an address approved by your Network Administrator.
To connect to the DVM4 over a LAN or the Internet:
1. Connect one end of a 100-Base-TX Ethernet cable to the Ethernet connector
on the DVM4. DO NOT USE THE SUPPLIED RED “NULL-
ETHERNET” CABLE.
2. Connect the other end of the Ethernet cable to your network hub or switch.
3. On your computer, launch a Web Browser (Netscape, Internet Explorer,
etc.).
4. In the address box, type “http://” followed by the IP address of your DVM4.
Upon hitting the Enter key on your keyboard, you will be presented with the
introductory WebPage from your DVM4.