User`s guide

Detailed Command Summary 21
[<ID>@]ngPG<CR> or [<ID>@]nngPG<CR> or [<ID>@]nnngPG<CR>
or [<ID>@]nnnngPG<CR> or [<ID>@]nnnnngPG<CR>
where n, nn, nnn, nnnn or nnnnn is the file number in ASCII.
Message Response: R<CR>
Loop Group
Description: This command causes all channels in the specified group to play and loop.
Command bytes: [<ID>@]gLG<CR>
or
[<ID>@]ngLG<CR> or [<ID>@]nngLG<CR> or [<ID>@]nnngLG<CR>
or [<ID>@]nnnngLG<CR> or [<ID>@]nnnnngLG<CR>
where n, nn, nnn, nnnn or nnnnn is the file number in ASCII.
Message Response: R<CR>
Still Group
Description: This command causes all channels in the specified group to Still.
Command bytes: [<ID>@]gSG<CR>
Message Response: R<CR>
Pause Group
Description: This command causes all channels in the specified group to Pause.
Command bytes: [<ID>@]gUG<CR>
Message Response: R<CR>
Stop Group
Description: This command causes all channels in the specified group to Stop.
Command bytes: [<ID>@]gRG<CR>
Message Response: R<CR>
Reset Video Channel
Description: This command will reset the video hardware of the designated channel. This is
useful when the channel is in an error state and stops responding to commands.
Command bytes: [<ID>@]cRV<CR>
Message Response: R<CR>