User`s guide

20 Detailed Command Summary
Gateway Address Set
Description: This command causes the Digital Video Machine 4 to set its Gateway address.
Command bytes: [<ID>@]nnn.nnn.nnn.nnnGW<CR>
Message Response: Gateway IP String<CR>
Subnet Mask Set
Description: This command causes the Digital Video Machine 4 to set its Subnet Mask
address.
Command bytes: [<ID>@]nnn.nnn.nnn.nnnSM<CR>
Message Response: Subnet Mask String<CR>
Assign Channel to Group
Description: This command assigns a channel to a group number. This is necessary if you
wish to synchronize 2 or more channels. You may assign channels to group
numbers 1-4. If you wish to remove a channel from a group, use a 0 for the
group number instead.
Command bytes: [<ID>@]gcAG<CR>
Message Response: R<CR>
Select File to Group
Description: This command is identical in function to Select File to Channel only it affects
all members of the specified group.
Command Bytes: [<ID>@]ngEG<CR> or [<ID>@]nngEG<CR> or [<ID>@]nnngEG<CR>
or [<ID>@]nnnngEG<CR> or [<ID>@]nnnnngEG<CR>
where n, nn, nnn, nnnn or nnnnn is the file number in ASCII.
or
[<ID>@]”<filename>”gSE<CR>
where <filename> is an ASCII file name surrounded by quotation marks.
Message Response: R<CR>
Play Group
Description: This command causes all channels in the specified group to play.
Command bytes: [<ID>@]gPG<CR>
or