User`s guide

Rear Panel 9
Rear Panel
Composite Video (Breakout Cable)
There is one RCA Composite Video connector available for each channel of the
DVM4. These can be found on the 25-Pin Breakout cable provided with the
DVM4. Be sure that this cable is securely connected in the connector labeled
“Audio/Video Breakout”.
Unbalanced Audio (Breakout Cable)
Each DVM4 channel has two analog RCA connectors located on the 25-pin
breakout cable.
NOTE: These connectors are not functional when a Dolby Digital 5.1 bitstream
is being played.
Digital Audio (Breakout Cable)
The breakout cable also provides one RCA digital audio connector for each
channel. These connectors will output S/PDIF and Dolby Digital 5.1 bitstream
audio signals.
High-Density RGB (Breakout Cable)
The HDB-15 Female connectors found on the second breakout cable provide
RGB, YUV, S-Video, and Composite video plus H-Sync and V-Sync. The
pinouts for this connector depends on which video mode is currently active. See
the diagrams on the next page.
It is important to verify your monitor
can display the currently selected Video Mode (NTSC by
default). Not all monitors are capable of displaying all of these
modes.