User`s manual

Alcorn McBride Binloop User’s Manual Page 80
Unbalanced Audio and Composite Video
Sixteen groups of RCA connectors provide stereo unbalanced analog
audio, and composite video outputs from each reproducer. They are
color-coded and labeled from the top of the cage down, in the following
order:
Color Signal
White Left Unbalanced Audio
Red Right Unbalanced Audio
Yellow Composite Video
Analog Component Video
The component video outputs can be configured to output in either the
RGB or YPbPr colorspace. The composite video (CVBS) connector is
always active no matter how the component video output is configured.
Show Control Port
The Show Control serial port is intended for applications where the
Binloop is to be controlled remotely via an RS-232 capable control
system. This could be an Alcorn McBride show controller, a PC, or
practically any device with an RS-232 serial port. Since this interface is
designed to be flexible, it supports a variety of different serial protocols.
These protocols include Alcorn 9-bit, Pioneer/AMI, and MIDI . For
more information on how to use the serial control interface, please refer
to the section titled Controlling the Binloop.
Pin Signal
2 RXD
3 TXD
5 GND
1, 4, 6 – 9 Not Used