User`s manual

Alcorn McBride Binloop User’s Manual Page 64
Action
This is the action (command) you want to have happen at the trigger
Time. Available selections are Play, Play Next, Pause, Still, Stop,
Search, Start Sequence, and Set Variable.
Action Description
Play
Plays a file (Synchronous Play). Also used to
resume from a search, still, or pause. (segment
number is ignored when used to resume)
Play Next
Queue a file to play when the current clip is
finished.
Pause
Pause video and audio playback, and mute video
output
Still
Pause video and audio playback, still frame
remains on-screen.
Stop
Stop playback
Search
Prepare a video for playback, first frame appears
on-screen when search is complete.
Start Sequence
Send a Start Sequence command to an Alcorn
McBride Show Controller out of the Show Control
Port. (Show Control Port must be set to Alcorn 9-
bit)
Set Variable
Send a Set Variable command to an Alcorn
McBride Show Controller out of the Show Control
Port. (Show Control Port must be set to Alcorn 9-
bit)
Loop
Check this box if you want the Play trigger to be a Play-and-Loop
command where playback will loop back to the beginning of the clip after
the clip ends.
Location
You can have the Action apply either to an individual Reproducer, a
Reproducer Group, or All Reproducers.
Number
This is either the Number of the individual Reproducer or Reproducer
Group selected in the Location. This field is disabled when All
Reproducers is selected.
Socket
This field is used for older Binloop systems that have multiple flash
memory sockets. This value is not relevant for the modern Binloop.