User`s manual

Alcorn McBride Binloop User’s Manual Page 59
Colorspace
RGB is actually RGsB /w sync
on green.
This setting allows you to configure the component video output
Colorspace as either RGB or YUV.
Play
This will cause the selected Reproducer to Play the selected file
segment. Clicking Play again will start playback over from the beginning.
Play Next
If a file is currently playing, clicking the Play Next button will queue
the specified file segment to play immediately after the current file is
finished playing.
Pause
This causes the currently playing file to stop. Clicking Play will cause it
to continue playback from where it was paused.
Mute Audio, Mute Video
These buttons cause the audio and video to be muted, respectively.
When video is muted, the video outputs are black.
Un-Mute Audio, Un-Mute Video
These buttons cause the audio and video to be un-muted, respectively.
Media Utilities
Important: You should always
Format the media in the
Binloop before you use it.
This button accesses another window that allows you to Format the compact
flash media on the selected Reproducer. Formatting will erase the contents of
the flash card.
Reproducer Groups
Note: By grouping the
reproducers together,
Reproducers can be
simultaneously commanded
using any of the Binloop’s
control interfaces.
Reproducers can be assigned to Groups using this selection. A
Reproducer that is a member of a Group will respond simultaneously
with other members to any command that is addressed to the Group.
This provides the ability for one Play command to trigger synchronized
multi-channel video playback.