User`s manual

Alcorn McBride Binloop User’s Manual Page 58
Reproducer…Controls…
When you select this menu item, the Reproducer Controls window
appears.
This window presents many controls that are good for playback testing
and troubleshooting. Each is explained below. The next menu item
allows you to select an individual Reproducer to control.
Socket
This setting is intended only for legacy Binloop systems with dual flash
sockets, and does not apply to the modern Digital Binloop or Video
Binloop. This setting should be left at the default value of ‘Primary’
Segment
Please refer to the Media Files
section of this manual for the
correct way to name and
number files.
The Segment refers to the particular video or audio file that you want to
play. It is a number referring to the file number on the media.
Search
You can Search a video file so that when you click Play it will begin
playing immediately. Entering an time in the adjacent box will search to
an offset within the video or audio file. The default value of 00:00:00.00
will search to the beginning of the clip.
Audio Channels
This setting is used for audio-only playback from the left or right channel.
If you use the default setting of Stereo or Mono, audio and video clips
play normally on both channels (mono clips are duplicated on the left and
right audio outputs). However, if you wish to play a mono audio clip on
only one of the audio outputs, you may select the Independent option.